For "Lighter Gas Refill" the following results were found: 127 products, 8 FAQs

Refuel Humidor Humidifier Question: How many times can I refill a crystal humidifier? Answer: As soon as the humidifier crystals have shrink remarkably or the humidifier lost size, please refill like dispatched. The crystals can be reloaded for almost infinite times. With regards to the affordable costs of a replacement, we recommend replacing crystals about once a year for hygienic reasons. But you can of course use them much longer. p6vRUikqCd4 8lHsqzONS5Q

All our GERMANUS lighters are looked after extremely courteously. If you ever have a problem with one of our lighters, contact us. We are happy to help and as a rule the service is free of charge for you. Almost all problems can be solved. Most defects can be repaired of our service ladies. If the lighter cannot be fixed or replaced, because the product is no longer produced: For tougher cases, we have an "enthusiast" at hand, who enjoys miniature mechanics. The service is free of charge for you (as a rule). Of course, any service is free of charge for you within the warranty anyway. For third-party products or if you have a lighter that you particularly like to hang on we recommend the following alternative: https://www.pl-center.de It is a lighter enthusiast. The services of the PL Center are external. The costs are there, however, according to information that customers gave back to us in an affordable price range. So far, we only received satisfied feedback from customers

I'm looking for a humidor with automatic humidification and temperature hold function so I do not have to think about what's going on with my cigars. How can I store my cigars fully automatically?There are not really fully automatic humidors on the market. Even if they are advertised as automatic, they still require a minimum of care. Most cigar smokers are looking for an automatic cigar humidor and are actually looking for an electronic humidifier that automatically regulates moisture content. You can use any (GERMANUS) humidor and add a humidor humidifier. The recommended humidifier depends on the humidor model.Our alternative to electronic Humidor Humidifiers: The GERMANUS Bead System. This is a regulator that is easily added to a humidor. Simply place the regulator in the humidor. The number of necessary regulator units of course depends on the humidor.For all humidors across the market: Moisture must be added. The tank must be refilled. Just as a car needs new gas from time to time, a humidor needs a stop at the "gas station" to top up with water in the humidifier tank.Question: I have seen a cheap climate cabinet. Would you recommend something like that?Answer: The question is very general. Therefore, I would like to give a general guideline. There are wine cabinets from Asia that are equipped with some wood and maybe a humidifier. This is electronics, which was usually never intended to store food in it without wrapping. Wine bottles are sufficiently dense. But some sommelier are worried about negative side effects of such cabinets. The temeprature control if ofter very limited and the noise from those machines is not acceptable to every wine lover. These cabinets are then simply equipped with a simple humidifier to call them a "humidor".The question is what can be expected for the sometimes surprisingly low prices? In the abstract, this is nothing but a fridge designed for wine storage, which was built for 30-60 € and includes some wood and a humidifier. With an automatic cigar storage as the impression is awoken, this has nothing to do.We have already been told by customers and competitors of fumes and extremely inaccurate temperature at high noise levels (buzzing). Cigars need reasonably stable but not cold temperatures. These even have a negative effect on the maturation and aging process. Temperature control is a nice feature, but not necessary or central. This feature is bought with unchecked plastics and completely unclear effects of these exhalations on the stored cigars. The permanent noise volume is not quiet in some reported cases.Important: Automatically working is very little in those fridges. (Those fridges usually miss electronic humidifiers. But if they have, please keep a critical eye on them no matter who is the manufacturer.)I would not recommend that either, but if you buy a low price German fridge and some wood for the interior, you have more storage volume at a better price. Again, this is not recommended. But if you really wanted to put cigars in a fridge, I would choose a tested European product. A lighting is also automatically integrated there. :)Buying a Cigar Humidor is a matter of trust just like any purchase. Those products are simply very basic wine fridges or coolers where cigars and a normal humidifier are placed. The risk here are fumes and in most offers the absence of a European supplier who would be available in the event of a defect or problem. A guarantee is usually missing completely or is rejected in the real case of defect.Each individual case must be considered individually. But these are general considerations based on logic thoughts and feedback of customers and competitors. The quality of these fridges is appropriate for the price. :) Electronics in the humidor is always a risk, as it brings the risk of malfunction in the topic of cigar storage.If I am now asked for my own personal opinion, I personally would not dare the experiment, because the possible success in relation to the possible or expected disadvantages and problems would be much too small.If you buy such a gastro cabinet, then please with guaranteed safety of the components, a reasonable shielding and reasonable humidification. Such cabinets are usually available from at least 1000 €, more from 2000 € available.

Most tobacco is too moist when sold; pipe tobacco fresh from the packet often has the texture of wet leaves. The effect of fire on wet foliage is well known: it produces fumes and the fire soon extinguishes. Tobacco like this is difficult or impossible to smoke, even for the most experienced pipe smoker. Regrettably, the fact that pipe smokers let their tobacco dry out before smoking is rarely mentioned. We have advised thousands of new pipe smokers. Repeatedly attempting to light excessively moist tobacco with a lighter or matches is a factor behind most problems. Anyone who went camping as a child will recall how hard it is to light damp wood. Damage to pipes is nearly always caused by applying flame to the wood for too long. At some point, the pipe really will smoke as the wood of the pipe starts to burn. Needless to say, this has nothing to do with pipe smoking and has no place in the proper usage of a pipe. Applying forensic fire investigation methods to the wood of the pipe will quickly determine the causes of damage or excessive temperatures. Having advised many clients, we can say that in the vast majority of pipe damage cases, temperatures that cannot be brought about by smouldering tobacco played a part. Therefore, you should not be concerned about smoking a pipe. However, please take care to avoid applying excessive ignition sources to the pipe. What should I do if damage occurs despite this? Nobody is perfect and people make mistakes. Simply contact us and we will find an answer for you. :)

Our pipes are made of solid briar wood. Scorching of the surface can impair taste. Provided the pipe is properly used, burnouts are physically impossible. Assessment Fundamentals of significant burn damage (burnouts) to pipes: In this case, the damage results from overheating, i.e. temperatures exceeding 1,000 degrees Celsius during smoking. In many instances, honeycomb-like charring (which only forms at around this temperature) is observed at the burnt spot. The normal smouldering temperature for a pipe is between 650 and 800 degrees Celsius. There are several possible reasons for excessive heat while tobacco is smouldering. A constant draught can cause such abnormal temperatures to arise. It is also possible that the pipe is held in the mouth at too steep an angle, with the user pulling on the pipe too strongly and too frequently, exacerbated by insufficient temperature control by hand. Defects in the wood (pockets, soft spots) can be generally ruled out. Where a defect is present, burn damage will ensue at a much lower temperature and will be minor and more specific. Finally I would note that excessively damp tobacco can exacerbate the situations outlined above. We GERMANUS are here for you even in case of an accident of your pipe. More deatils in our GERMANUS Pipe FAQThis is what other manufacturers say: Burners of Rattrays Tobacco Pipes This is what the manufactruer Rattrays says about burners and warrenty claims. Briar is a very heat resistant material, nevertheless it is still just wood, which can be damaged by heat. Your pipe works in a similar way as a fireplace. If you open the air valve the wood burns much faster and more furious. If you draw with too much force at your pipe, the ember will get to a small fire and probably will damage the inside of your pipe. If the pipe gets too hot, immediately put it aside and let it cool down. Burners taste and smell unpleasant and beyond that are visible. If you recognize fire damage inside the bowl, under no circumstances continue to smoke the pipe. You will provoke a total loss, which in most cases will not be replaced by the manufacturer. Bring the pipe to your pipe shop, and your dealer will send the pipe to a repair shop. In the first states of a burner the pipe can be saved with a protective coating without any difficulties. Customer complaints of Rattray Pipes Most burners will not be replaced by the pipe manufacturers for the above reasons. There are some exceptions however. If the pipe does not show a large burned area, but a small pointed funnel shaped hole, it suggests that this was a faulty spot – a small stone inside the wood or a cavern. Also, if the smoke channel was drilled too close to the outside and the pipe is very thin walled, an eligible reason for reclamation can occur. If the pipe has a large burned area with fissures, in most cases the pipe was smoked too hot. Most burners are situated around the blowhole, there the generated heat is very strong if the suction is too high. The bottom of a lot of complained pipes is very thin, but pipe manufacturers would never ship out such thin walled pipes. Even if every series pipe is slightly different, the wall strenght is the same in every single piece. If the pipe is still warm and moist, the wood is especially prone to damage from scratching out the bowl, so please let the pipe cool down before cleaning. Also the attempt to smoke the last crumb ob tobacco often ends with a burner, because the lighter flame gets too close to the wood. Fire damage in the upper part of the bowl are usually caused during the lighting process. You should always move the flame in a circular and even way. If you hold the flame to the same spot too long, the wood can burn very fast. You can easily identify left-handed pipe smokers with a burner on the right side of the bowl and vice versa. In the end we have to mention one more thing: If you want to smoke on the bike, in the car with open windows, or on a boat – you should use a pipe with a lid. The lid will protect the pipe from generating too much heat caused by the increased wind.

Corncob pipes turn out differently depending on their age. This concerns both the age of the corncob itself and the age of service. In addition, there may be slight colour differences in the OBerface sealing.In spring, for example, the fairly fresh maize harvest from last year is processed. Therefore, the pipes produced then tend to be lighter than later in the year.Important: The pipe darkens through use. You can speed this up by applying an odourless grease or hand cream. The photo shows a pipe of average age as it looks after a few weeks.

Matches and pipe lighters can be used. Special pipe matches are produced from sulphur-free, untreated wood. Most pipe lighters produce a flame that comes from the side of the lighter rather than the top, enabling the user to light the tobacco with ease and precision. Naturally, GERMANUS offers a whole series of pipe lighters. Rather than apply the flame to a single point, move it around in a circular motion. Flame contact should be brief, meaning 1-3 seconds.If the wood shows clear signs of charring, the flame contact was obviously too long.When lighting up, draw gently and evenly on the pipe. In most cases, the tobacco on the surface will swell up. This is entirely normal.Most experienced pipe smokers will let their pipe go out after first lighting it, then carefully press down the unravelled tobacco with a pipe tool and light up again. Applying flame is much easier second time around, with the tobacco surface now perfectly even.Tobacco tampers are one tool in the pipe smoker’s arsenal primarily designed for this purpose. Under no circumstances should a tamper be used to tamp the pipe forcefully in the manner of an old-fashioned muzzle-loader.

I recognized a rating for a product of a competitor lately. It was about a humidor humidifier. The user complained about a not working product. Well, there are differences in quality. Every humidifier can be soaked with distilled water. If this doesn’t work as expected, there’s no malfunction, but an operator error. If your humidor doesn’t reach the expected values, the following explanatory approach can be also helpful and applicable: Our GERMANUS humidifier can be soaked easily. Please place it for a couple of minutes in distilled water. 15 Minutes should be enough to do the job. Alternatively, you can insert water at the grille with the help of an injection. Syringes with oder without needle can be bought at a pharmacy or printer shop. By osmotic powers it’s possible that water wouldn’t drain inside due to a inner vacuum, otherwise. The same of course applies to the known humidor liquids. You will have to deal with the same physical issue that makes a diving bell working. The vacuum cannot escape because of the counter-pressure. How frequently this phenomenon appears with humidifiers also depends on the fluid’s density that you’re using. Soaked once, the whole issue will be solved. Please see the following videos, which show the process. Refill of a Humidifer Box with a Squeeze Bottle (Minute: 1:15) BAp2EitSbA8 Humidifier submerged in water p6vRUikqCd4